Re: [STDS-802-11-TGBE] PDT-MAC-MLO: General and Multi-link setup: Proced

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Arik,

Thanks again for the review. I have provided my response on part III and will do some suggested changes in the next revision.

Best,

Po-Kai

From: Arik Klein <arik.klein@xxxxxxxxxx>
Sent: Tuesday, September 15, 2020 9:56 AM
To: Huang, Po-kai <po-kai.huang@xxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-MAC-MLO: General and Multi-link setup: Procedure

Hi Po-Kai,

Thanks for updating the 11-20/1309r4 doc.

Please find in the enclosed doc:

Editorial comments for Part 1
Further comments for Part 2 & Part 3.

Regards,

Arik

From: Huang, Po-kai <po-kai.huang@xxxxxxxxx>
Sent: יום ב 14 ספטמבר 2020 20:42
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO: General and Multi-link setup: Procedure

Hi Arik,

Thanks for the detailed review. Please see my response in the attachment.

Best,

Po-Kai

From: Arik Klein <arik.klein@xxxxxxxxxx>
Sent: Monday, September 14, 2020 10:14 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO: General and Multi-link setup: Procedure

Hi Po-Kai,

Thanks for sharing the doc.

I’ve reviewed parts 1&2 in 11-20/1309r3.

Please find my comments and suggestions in the enclosed doc.

Regards,

Arik

From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: יום א 13 ספטמבר 2020 23:23
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO: General and Multi-link setup: Procedure

Hello Po-Kai,

In 20/1309r3, you have the following instruction to the editor in subclause 11.3.5.3 and 11.3.5.5 (based on REVmd D4.0):

h) The SME shall refuse an association request from a VHT STA or non-AP M LD that does not support all of the <VHT-MCS, NSS> tuples indicated by the Basic VHT-MCS And NSS Set field of the VHT Operation parameter of the AP or the corresponding AP in each setup link, respectively, in the MLME-START.request primitive.

h) The SME shall refuse a reassociation request from a VHT STA or a non-AP MLD that does not support all of the <VHT-MCS, NSS> tuples indicated by the Basic VHT-MCS And NSS Set field of the VHT Operation parameter of the AP or the corresponding AP in each setup link, respectively, in the MLME-START.request primitive.

In P802.11ax D7.0, we have an additional item h1) for each of these two subclauses:

h1) The SME shall refuse an association request from an HE STA that does not support all of the <HE-MCS, NSS> tuples indicated by the Basic HE-MCS And NSS Set field of the HE Operation parameter in the MLME-START.request primitive

h1) The SME shall refuse a reassociation request from an HE STA that does not support all of the <HE-MCS, NSS> tuples indicated by the Basic HE-MCS And NSS Set field of the HE Operation parameter in the MLME-START.request primitive.

May I know if you need to modify these two items h1) in your PDT text proposals too?

Regards,
Edward

On Wed, Aug 26, 2020 at 6:49 PM Huang, Po-kai <po-kai.huang@xxxxxxxxx> wrote:

Dear all,

The proposed spec texts for agreements in MLO-General and MLO-Multi-link setup: Procedure is uploaded.

https://mentor.ieee.org/802.11/dcn/20/11-20-1309-00-00be-proposed-draft-specification-for-ml-general-mld-authentication-mld-association-and-ml-setup.docx

Please take a look and let me know if you have further comments.

Best,

Po-Kai

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1