[STDS-802-11] Registering for the Jan 2017 IEEE 802 Wireless session
--- This message came from the IEEE 802.11 Working Group Reflector ---
Dear 802.11 participants,
If you registered for the 802 Wireless session in Atlanta:
1. The registration form asks you to use the same email as for your web
account
2. The registration form asks you to enter your SA PIN (and provides a
link to tell you how to find this out)
If you have done neither of these, and you are an 802.11 voter, you
will not have a voting token on your badge.
This is because the identification of who is a voter is provided to the
meeting planners as a list of
voter emails and SA Pins.
If you turn up at the meeting and do not have an expected voter token,
this is probably the reason. Based on a quick
look at the registration data, this is about 10% of all registrants.
The meeting planners will inquire of the relevant chair the voting
status of an attendee who claims to have a missing
badge. The chair will eventually respond, and the meeting planners
will eventually reprint the badge if a voting token
is missing.
I put in "eventually" because the meeting planners and chairs will be
busy at the start of the meeting, and will need to give priority to
other matters. I also note that this is a situation of the individual's
own making.
You can re-enter the registration page and correct a missing PIN
(provided you can remember the
email and password you selected during registration). You would need
to do this asap, because the badges will be
bulk printed in a week or so's time. If you cannot remember your
password, you will need to email the meeting
planners to perform a password reset first.
--
Best Regards,
Adrian Stephens
IEEE 802.11 Working Group Chair
mailto: adrian.p.stephens@xxxxxxxx
Phone: +1 (971) 203-2032
Skype: adrian_stephens
_______________________________________________________________________________
If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.
Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.
If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________