Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11] Registering for the Jan 2017 IEEE 802 Wireless session



--- This message came from the IEEE 802.11 Working Group Reflector ---

Knowing there is already a 10% occurrence of this condition, perhaps the meeting staff can be supplied a current voter list to remedy this on the spot, vs. having to track officers down.

/b
 


-----Original Message-----
From: *** IEEE stds-802-11 List *** [mailto:STDS-802-11@xxxxxxxx] On Behalf Of Adrian Stephens
Sent: Friday, December 16, 2016 2:49 AM
To: STDS-802-11@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11] Registering for the Jan 2017 IEEE 802 Wireless session

--- This message came from the IEEE 802.11 Working Group Reflector ---

Dear 802.11 participants,

If you registered for the 802 Wireless session in Atlanta:
1. The registration form asks you to use the same email as for your web account 2. The registration form asks you to enter your SA PIN (and provides a link to tell you how to find this out)

If you have done neither of these, and you are an 802.11 voter,  you will not have a voting token on your badge.
This is because the identification of who is a voter is provided to the meeting planners as a list of voter emails and SA Pins.

If you turn up at the meeting and do not have an expected voter token, this is probably the reason.  Based on a quick look at the registration data,  this is about 10% of all registrants.
The meeting planners will inquire of the relevant chair the voting status of an attendee who claims to have a missing badge.  The chair will eventually respond,  and the meeting planners will eventually reprint the badge if a voting token is missing.

I put in "eventually" because the meeting planners and chairs will be busy at the start of the meeting,  and will need to give priority to other matters.  I also note that this is a situation of the individual's own making.

You can re-enter the registration page and correct a missing PIN (provided you can remember the
email and password you selected during registration).   You would need 
to do this asap, because the badges will be
bulk printed in a week or so's time.   If you cannot remember your 
password,  you will need to email the meeting planners to perform a password reset first.

--
Best Regards,

Adrian Stephens
IEEE 802.11 Working Group Chair
mailto: adrian.p.stephens@xxxxxxxx
Phone: +1 (971) 203-2032
Skype: adrian_stephens

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________