Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-16] update: P802.16e/D8 Sponsor Ballot Results, and Call for Reply Comments



Six late comments have been added to the end of the revised database:
	http://ieee802.org/16/docs/05/80216-05_035r1.zip


>The P802.16e/D8 Sponsor Ballot closed about two hours ago. By my approximate count, the result was 123 Approve, 17 Disapprove (88% Approval).
>
>The database has 733 comments:
>	http://ieee802.org/16/docs/05/80216-05_035.zip
>
>This note is a Call for Reply Comments, with a deadline of Monday 13 June at 12 noon local time in Chicago, USA <http://tinyurl.com/cmjhu>. The reference is Chicago because that is the site of the Ballot Resolution Committee meeting.
>
>I am sure that the Ballot Resolution Committee would appreciate your reply comments. Instructions are below.
>
>Roger
>
>Dr. Roger B. Marks  <mailto:marks@nist.gov> +1 303 497 7837
>National Institute of Standards and Technology/Boulder, CO, USA
>Chair, IEEE 802.16 Working Group on Broadband Wireless Access
>        <http://WirelessMAN.org>
>
>----------------
>To create and submit reply comments:
>
>(1) Obtain Commentary <http://ieee802.org/16/docs/Commentary>, if you don't have it.
>
>(2) Unzip the Comment Report to get a ".USR" file, which will open in Commentary.
>
>(3) Read the comments in Commentary. When you want to respond to a comment, check the "Marked" box at the top of that record. Then fill out the following fields:
>
>Recommendation by:
>Recommendation:
>Proposed Resolution:
>Reason for Recommendation:
>
>You are justified in recommending rejection on grounds of incompleteness or lack of a specific change request.
>
>(4) When you are finished entering replies, look under Scripts and choose "Find Marked Records". This will find the records for which you checked the "Marked" box. Only the found records will be exported in Step (5). Don't include records on which you have no reply comment.
>
>(5) Under Scripts, choose "Export Clause Editor's Proposals". Choose the file type "FileMaker Pro Runtime Files". Enter a file name of the form "SB16e_reply_Name.USR", where "Name" is your name.
>
>(6) Upload the exported file to <http://tgeballot.wirelessman.org>. That site is continuously on-line. However, if you have trouble with that URL, try <http://dot16.org>.
>