Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-16] Fw: [STDS-802-16] 802.16f approved



Thank you, Peretz.

Roger

At 21:44 -0400 2005-09-25, Peretz Feder wrote:
>Well done Phil, Roger et al.
>
>Congratulations indeed.
>
>Peretz Feder
>
>On 9/23/2005 3:56 PM, Phillip Barber wrote:
>
>>Thanks Roger & Jon. And definitely thanks to Joey. Editors are the unsung
>> heroes to our standardization work.
>>
>>Thanks to the entire 802.16 community, but especially to those members who
>>were active in the project! I expect we will enjoy the same success with the
>> pending, new MIB project to support the Cor1 corrections and 16e additions.
>>
>>Thanks,
>>Phillip Barber
>>Huawei
>>
>> 
>>
>>>----- Original Message -----
>>>From: "Jonathan Labs" <mailto:jlabs@WAVESAT.COM><jlabs@WAVESAT.COM>
>>>To: <mailto:STDS-802-16@listserv.ieee.org><STDS-802-16@listserv.ieee.org>
>>>Sent: Friday, September 23, 2005 1:06 PM
>>>Subject: Re: [STDS-802-16] 802.16f approved
>>>
>>>
>>>   
>>>
>>>>Congratulations Phil, Joey and Netman!  Well done.
>>>>
>>>>Jon
>>>>
>>>>     
>>>>
>>>>>-----Original Message-----
>>>>>From: Roger B. Marks [<mailto:r.b.marks@IEEE.ORG>mailto:r.b.marks@IEEE.ORG]
>>>>>Sent: Friday, September 23, 2005 12:33 PM
>>>>>To: <mailto:STDS-802-16@LISTSERV.IEEE.ORG>STDS-802-16@LISTSERV.IEEE.ORG
>>>>>Subject: [STDS-802-16] 802.16f approved
>>>>>
>>>>>802.16f ("Management Information Base") was approved today by
>>>>>the IEEE-SA Standards Board. As a result, IEEE Std
>>>>>802.16-2004 is now considered to be amended by the new IEEE
>>>>>Std 802.16f.
>>>>>
>>>>>I'll forward the formal notice when I receive it.
>>>>>
>>>>>Congratulations to the participants, the Working Group, and
>>>>>the NetMan Task Group, especially Chair Phil Barber and
>>>>>Editor Joey Chou.
>>>>>
>>>>>Roger
>>>>>
>>>>>
>>>>>       
>>>>>
>>>>>>All,
>>>>>>
>>>>>>At this week's SASB meetings the following projects were
>>>>>>         
>>>>>>
>>>>>approved: 802.3at, 802.3-2005/Cor1, 802.1AR, 802.1aq, 802.1ap
>>>>>and the following standards were approved: 802.11e and
>>>>>802.16f.  Congratulations.
>>>>>       
>>>>>
>>>>>>Regards,
>>>>>>
>>>>>>--Paul
>>>>>>         
>>>>>>
>>
>>
>>