Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-16] Fw: [STDS-802-16] 802.16f approved

Thanks Roger, Philip, Jon, and all 802.16 members for your active
contributions to make it possible to complete the 16f project right on
time for the ramping up of WiMAX deployment.

I am looking forward to working with you in the upcoming mobile MIB
project.

Regards,
 
Joey Chou
Broadband Wireless Division, Intel
(480)554-6672
 

-----Original Message-----
From: Phillip Barber [mailto:pbarber@BROADBANDMOBILETECH.COM] 
Sent: Friday, September 23, 2005 12:56 PM
To: STDS-802-16@listserv.ieee.org
Subject: [STDS-802-16] Fw: [STDS-802-16] 802.16f approved

Thanks Roger & Jon. And definitely thanks to Joey. Editors are the
unsung
 heroes to our standardization work.

Thanks to the entire 802.16 community, but especially to those members
who
were active in the project! I expect we will enjoy the same success with
the
 pending, new MIB project to support the Cor1 corrections and 16e
additions.

Thanks,
Phillip Barber
Huawei

> ----- Original Message ----- 
> From: "Jonathan Labs" <jlabs@WAVESAT.COM>
> To: <STDS-802-16@listserv.ieee.org>
> Sent: Friday, September 23, 2005 1:06 PM
> Subject: Re: [STDS-802-16] 802.16f approved
>
>
>> Congratulations Phil, Joey and Netman!  Well done.
>>
>> Jon
>>
>>> -----Original Message-----
>>> From: Roger B. Marks [mailto:r.b.marks@IEEE.ORG]
>>> Sent: Friday, September 23, 2005 12:33 PM
>>> To: STDS-802-16@LISTSERV.IEEE.ORG
>>> Subject: [STDS-802-16] 802.16f approved
>>>
>>> 802.16f ("Management Information Base") was approved today by
>>> the IEEE-SA Standards Board. As a result, IEEE Std
>>> 802.16-2004 is now considered to be amended by the new IEEE
>>> Std 802.16f.
>>>
>>> I'll forward the formal notice when I receive it.
>>>
>>> Congratulations to the participants, the Working Group, and
>>> the NetMan Task Group, especially Chair Phil Barber and
>>> Editor Joey Chou.
>>>
>>> Roger
>>>
>>>
>>> >All,
>>> >
>>> >At this week's SASB meetings the following projects were
>>> approved: 802.3at, 802.3-2005/Cor1, 802.1AR, 802.1aq, 802.1ap
>>> and the following standards were approved: 802.11e and
>>> 802.16f.  Congratulations.
>>> >
>>> >Regards,
>>> >
>>> >--Paul
>>>
>>
>