Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-16] IEEE P802.16/Conformance04-1 Sponsor Ballot Recirc



P802.16/Conformance04/D7 has been prepared by Editor Herbert Ruck:
	http://ieee802.org/16/pubs/P80216_Conf04.html

from the Session #42 comment resolutions:
	http://ieee802.org/16/docs/06/80216-06_015r2.zip

The draft is in Sponsor Ballot Recirc until 28 
April, per the announcement below from the 
IEEE-SA Balloting Center.

Roger


>Subject: Ballot Recirculation, P802.16-Conformance04
>
>Dear IEEE P802.16-Conformance04-1 Balloting Group Member:
>
>This e-mail is to advise you of the opening of 
>IEEE Standards Sponsor New Ballot Recirculation 
>- 1 for:
>Title: Standard for Conformance to IEEE 802.16 - 
>Part 4: Protocol Implementation Conformance 
>Statement (PICS) Proforma for Frequencies below 
>11 GHz.
>Scope: This standard represents the Protocol 
>Implementation Conformance Statement (PICS) 
>Proforma, per ISO/IEC Standard 9646-7 (1995) and 
>ITU-T X.296, for conformance specification of 
>base stations and subscriber stations based upon 
>the air interface specified in IEEE P802.16-REVd 
>for frequencies below 11 GHz.
>Purpose: This document describes the 
>capabilities and options within the air 
>interface specified for frequencies below 11 GHz 
>in IEEE P802.16-REVd. It is to be completed by 
>the supplier of a product claiming to implement 
>the protocol. It indicates which capabilities 
>and options have been implemented. It allows a 
>user of the product to evaluate its conformance 
>and to determine whether the product meets the 
>user's requirements.
>
>***** IMPORTANT *****
>If this is a recirculation of a Reaffirmation 
>Ballot, it may include amendments and/or 
>corrigenda to the base Standard.
>
>Since this is a recirculation ballot, you need 
>only respond if you wish to change your initial 
>vote. If you do not respond to this 
>recirculation ballot, your last vote will be 
>carried forward.  Also, as this is a 
>recirculation ballot, a change to 'do not 
>approve' (i.e., a negative vote) which is 
>submitted with comments, shall be based only on 
>the changed portions of the balloted document, 
>clauses affected by the changes, or portions of 
>the balloted document that are the subject of 
>the unresolved negative votes." (IEEE Standards 
>Board Operations Manual, Part 5.4.3.2)
>
>BALLOT OPENS: 13-Apr-2006
>BALLOT CLOSES: 28-Apr-2006. 
>No votes and/or comments will be accepted after 
>11:59 p.m. Eastern Time on the close date. Make 
>sure you review the document, cast your vote, 
>and submit your comments before the closing 
>date/time.
>
>***** TO ACCESS THE DOCUMENT, SUBMIT YOUR VOTE, AND SUBMIT YOUR COMMENTS *****
>1. Log onto myBallot the IEEE Standards 
>Associationís (IEEE SA)  Electronic Balloting 
>System, at
>https://balloting.standards.ieee.org/my-site
>2. Click on "Manage myBallot Activity." If your 
>logon provides Sponsor access, you must click on 
>myBallot Control Panel first.
>3. Locate P802.16-Conformance04.
>4. Click on the DRAFT# to open the 
>draft/standard; click on the drop-down box to 
>change your vote; click on the comments link to 
>submit your comments.
>REMEMBER: This draft/standard is posted for your 
>review for balloting purposes only and should 
>not be copied or redistributed.
>
>NOTE: If you are fulfilling coordination duties 
>only, you will not be able to cast a vote. 
>Coordinators can only submit comments.  Please 
>follow the instructions above to access the 
>document and submit your comments
>
>***** QUESTIONS *****
>If you should have any questions about the document, please contact :
>
>or the Sponsor Chair:
>ROGER B MARKS
>r.b.marks@ieee.org
>
>***** myBallot QUESTIONS *****
>If you should have questions about using 
>myBallot, please contact the IEEE-SA Balloting 
>Center at myBallot@ieee.org
>
>NOTE: To show our appreciation of your effort, 
>the names of all voters will be listed in the 
>front matter of the published standard. Your 
>vote and your contact information will *not* be 
>included.
>
>Thank you for your participation in this ballot.