Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [RPRWG] From the Vice Chair




Let me add one requirement to Mike's list for 802.17 Vice Chair
qualifications.  The Vice Chair must have support from their company to take
on this obligation.  If you are seeking the office, either come to the
meeting with a letter of commitment fro appropriate management within your
company, or line up a company official that will be able to get such a
letter to you prior to the Friday SEC meeting, if you are elected at the
closing 802.17 plenary session.

Best regards,

Robert D. Love
President, LAN Connect Consultants
7105 Leveret Circle       Raleigh, NC 27615
Phone: 919 848-6773    Mobile: 919 810-7816
email: rdlove@xxxxxxxx    Fax: 208 978-1187
----- Original Message -----
From: "Mike Takefman" <tak@xxxxxxxxx>
To: "802.17" <stds-802-17@xxxxxxxx>
Sent: Friday, October 17, 2003 1:14 PM
Subject: Re: [RPRWG] From the Vice Chair


>
> Dear Bob,
>
> First let me thank you for the hard work and guidance you have
> provided the group since its inception as a study group
> and your work as Chair of the RPR Alliance which was
> significant in creating industry buzz around our technology.
>
> Best of Luck in your future activities.
>
> Dear RPRWGers,
>
>  From a process perspective we need to hold an election
> for a new vice-chair in Albuquerque. This will take
> place at our closing plenary session. The closing
> plenary will either be on wednesday afternoon or thursday
> morning depending on how comment resolution goes on
> 802.17 Draft 2.7 and 802.17a.
>
> I would appreciate that anyone interested in the position
> reply to the reflector with their intention to stand for
> the role. While the following list is not necessarily all
> of the tasks of the Vice Chair, it represents the minimum
> commitment.
>
> Vice-Chair role:
> 1) Represent the working group in the event of the chair
> not being able to. This means the vice chair MUST be prepared
> to stay all day friday of plenary weeks to attend the
> SEC closing meeting.
> 2) Work with the chair on the new financial requirements
> the WG has to perform. The vice chair will have signature
> authority on the 802.17 bank account.
> 3) Insure meeting minutes are correct and delivered expediantly.
>
> The selected candidate will have to stand for re-election
> (as will the chair) in March 2004.
>
> Please be advised as well that due to the kerfuffle over
> 802.20, the SEC will review the qualification of the
> vice chair at the friday closing meeting and vote on
> confirmation.
>
> cheers,
>
> mike
>
> Robert D. Love wrote:
> > Dear 802.17 Resilient Packet Ring Working Group,
> >
> > I thank you for the opportunity to be the Vice Chair of the RPR 802.17
> > Working Group.  We have almost completed our Working Group ballot, and
> > 802.17 will be moving onto new extensions of this exciting technology.
> > With this phase of our project almost done, now is a good time for
> > evaluating where our future efforts are best applied.  I have therefore
> > decided that this is the right time for me to move on to other
> > opportunities.  Consequently, I have advised Mike Takefman that I am
> > resigning as your Vice Chair.
> >
> > RPR continues to have the potential for dramatically impacting the
> > Telecom industry.  I look forward to the early progression of the
> > standard draft to Sponsor ballot, and to the acceptance of the standard
> > and of the underlying technology in the market.
> >
> > I have enjoyed working with you, and hope to have other opportunities to
> > do so again in the near future.
> >
> > Best regards,
> >
> > Robert D. Love
> > President, LAN Connect Consultants
> > 7105 Leveret Circle       Raleigh, NC 27615
> > Phone: 919 848-6773    Mobile: 919 810-7816
> > email: rdlove@xxxxxxxx <mailto:rdlove@xxxxxxxx>    Fax: 208 978-1187
>
>
> --
> Michael Takefman              tak@xxxxxxxxx
> Distinguished Engineer,       Cisco Systems
> Chair IEEE 802.17 Stds WG
> 3000 Innovation Dr, Ottawa, Canada, K2K 3E8
> voice: 613-254-3399       cell:613-220-6991
>
>