Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: stds-80220-requirements: System Gain Requirement, 4.1.1




Walter,

I was attempting to tie the system gain into the spectral efficiency
requirement.  The average user data rates that I used come from section
4.1.7.

-----Original Message-----
From: Rausch, Walter F [GMG] [mailto:walter.f.rausch@mail.sprint.com]
Sent: Thursday, July 31, 2003 4:58 PM
To: Neka Hicks; Stds-80220-Requirements (E-mail)
Subject: RE: stds-80220-requirements: System Gain Requirement, 4.1.1


Neka,

Can you expand on why you specify the per user data rates in terms of a
specific modulation bandwidth? Why not specify the throughput without the
bandwidth constraint?

Walter Rausch
Principal Network Evolution Planner
Sprint Broadband
6360 Sprint Parkway, Bldg. 5
MS:  KSOPHE0310-3A350
Overland Park, KS  66251
walter.f.rausch@mail.sprint.com
Voice: 913-762-1598
FAX:  913-762-0506
PCS:  913-269-5017

-----Original Message-----
From: Neka Hicks [mailto:nhicks@Clearwire.com]
Sent: Monday, July 28, 2003 4:23 PM
To: Stds-80220-Requirements (E-mail)
Subject: stds-80220-requirements: System Gain Requirement, 4.1.1


All,

Clearwire would like to make the following contribution regarding system
gain.

 <<clearwire contribution 072803 - system gain.rtf>> 

Neka C. Hicks
Director of Network Engineering
Clearwire Technologies

469-737-7555 (office)
817-706-2548 (cell)