Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
All
I think someone has some misunderstanding on the
datasheet. For PIN (or APD) Rx, the average sensitivity in spec is typ. -20dBm ~
-21dBm now. But please pay attend to the test conditions. The conditions may be
Rext=12dB or higher, temperature is 25C and beginning of life. The worst
sensitivity may not show in spec.
But we have to reference the worst conditions
in our design. The worst conditions are Rext=9dBm (OLT Tx spec at EOL),
over temperature and end of life. The worse sensitivity at EOL generally 1.5dB ~
2dB worse than typ. sensitivity.
Again, for module design, the 1-2dB margin is needed
for PCB noise, filter and others.
The typical module sensitivity may be around -16dBm
~ -17dBm w/o FEC in production.
Best regards
Hao From: Bidyut Parruck [mailto:Bidyut@CORTINA-SYSTEMS.COM] Sent: Tuesday, September 04, 2007 9:52 AM To: STDS-802-3-10GEPON@LISTSERV.IEEE.ORG Subject: Re: [8023-10GEPON] D/S power budget & wavelenght plan I was referring
to 2 commercially available (not experimental) PIN-PD ROSAs. Both had
sensitivity of -21dBm for BER of 1x10E-12. I will be glad
to provide the datasheets to anyone who requests it. Because of IEEE policy, I
cannot upload it to the server. From: À±ºó¿µ
[mailto:byyun@etri.re.kr] Dear Akihiro
Otaka, My proposal does
not consider FEC to meet the power budget. I heard that a ROSA(PIN-PD) with -21dBm was reported experimentally. I am not sure if the aggressive PIN-PD can be commercially achieved near
future. I think that we have to keep
the consistency with the existing standard if possible. So I suggest that the
FEC should be just optional like 1G EPON. Sincerely
yours,
Dear, Mr. Yoon |