Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [10GMMF] Changes to Clause 45 for 10GBASE-LRM




Petre,
There should only be one new code to cover the P802.3aq activity, and it would be associated with PMA/PMD type 10GBASE-LRM.  

Regards,
Paul Kolesar
SYSTIMAX® SOLUTIONS
1300 East Lookout Drive
Richardson, TX 75082
Phone:  972.792.3155
Fax:      972.792.3111
eMail:   pkolesar@systimax.com



Petre Popescu <popescu@QUAKETECH.COM>
Sent by: owner-stds-802-3-10gmmf@IEEE.ORG

01/14/2005 05:21 PM
Please respond to
"IEEE P802.3aq 10GBASE-LRM" <stds-802-3-10gmmf@IEEE.ORG>

To
STDS-802-3-10GMMF@LISTSERV.IEEE.ORG
cc
Subject
[10GMMF] Changes to Clause 45 for 10GBASE-LRM







Hi all,
The required changes in clause 45 to include 10GBASE-LRM.
Table 45-7
       1.7.15:4 reserved
       1.7. 3 2 1 0
            1 0 0 1=10GBASE-LRM-EW PMD type (RO)

            1 0 1 0=10GBASE-LRM-LW PMD type (RO)

            1 1 0 1=10GBASE-LRM-ER PMD type (RO)

            1 1 1 0=10GBASE-LRM-LR PMD type (RO)

            1 0 1 1=reserved (RO)

            1 1 0 0=reserved (RO)

            1 1 1 1=reserved (RO)
Table 45-11
       1.11.15:4 reserved, ignore on read (RO)
       1.11.3  1 PMA/PMD is able to perform 10GBASE-LRM (RO)
               0 PMA/PMD is not able to perform 10GBASE-LRM (RO)
All EDC specific control/status bits will be in the vendor specific
registers.

The reserved codes in Table 45-7 can be used for 10GBASE-KX4/KR.

Best regards, Petre

--
Petre Popescu
Quake Technologies
613.270.8113.x2229
613.220.8982 (cell)