Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
I believe the update below addresses your proposed changes. Please let me know if this is not the case.
From: George Zimmerman <george@xxxxxxxxxxxxxxxxxxxx>
Sent: Tuesday, January 15, 2019 2:24 PM To: STDS-802-3-NGAUTO@xxxxxxxxxxxxxxxxx Subject: Re: [802.3_NGAUTO] Comment #115 redrawing of Figure 149-7 Thanks, Brett – this seems reasonable – where was the reference to DS_n[0] and DS_n[1]? (I can’t find it). The ones I was referring to are the Scr_n[0], Scr_n[3] and Scr_n[8] (without the extra comma in the subscript) which relate to the nomenclature in Figure 149-10 and equation 149-8 used for the side stream scrambler.
George A. Zimmerman, Ph.D. President & Principal Consultant CME Consulting, Inc. Experts in PHYsical Layer Communications 1-310-920-3860
From: Brett McClellan <bmc@xxxxxxxxxxx>
Natalie, I suggest changing Scr_n,0 and Scr_n,1 to DS_n[0] and DS_n[1] and change d_n,0 and d_n,1 to D_n[0] and D_n[1] because those terms were accepted as the text for the data scrambler section.
Brett
From: George Zimmerman <george@xxxxxxxxxxxxxxxxxxxx>
External Email A very minor thing on the nomenclature – the scrambler bits are Scrn with a capital S, not scrn all lower case.
George A. Zimmerman, Ph.D. President & Principal Consultant CME Consulting, Inc. Experts in PHYsical Layer Communications 1-310-920-3860
From: NATALIE WIENCKOWSKI <nwienckowski@xxxxxxx>
Resending
Natalie
Sent from my Sprint Samsung Galaxy S8.
-------- Original message -------- From: NATALIE WIENCKOWSKI <NWIENCKOWSKI@xxxxxxx> Date: 1/14/19 10:02 PM (GMT-08:00) Subject: Comment #115 redrawing of Figure 149-7
Colleagues,
Please look at the proposed changes to Figure 149-7 based on the decision in Comment #115 to make this a block diagram and move it to Section 149.3.2.2.
Please plan to request any desired changes tomorrow.
Thanks,
Natalie
To unsubscribe from the STDS-802-3-NGAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGAUTO&A=1 To unsubscribe from the STDS-802-3-NGAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGAUTO&A=1 To unsubscribe from the STDS-802-3-NGAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGAUTO&A=1 To unsubscribe from the STDS-802-3-NGAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGAUTO&A=1 To unsubscribe from the STDS-802-3-NGAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGAUTO&A=1 |