Re: [LinkSec] Bridge Details
Russ and all,
This was an initiative decided last minute and we did not have time to solve
all logistics to get a good quality set up. We need to see if this is needed
in the future. Next meeting is a plenary meeting therefore it should not be
needed.
In addition to the logistics there are some procedures that need to be
addressed before this can be applied in a regular basis. The IEEE802 rules
does not contemplate remote access to meetings. Therefore, there is a need
to define rules for remote participation. 802 executive members want these
issues to be addressed first. The main issue I heart is the voting rights of
people calling in. There is also the opinion that meetings are organized to
have face-to-face interaction. However, we have participants from several
WGs and we do not collocate.
It is quite an effort to make this available and hence I would like to get
some feedback from the group on how useful this can be to increase
participation, and hear additional suggestions that may help too.
Please comment,
Dolors
----- Original Message -----
From: "Russ Housley" <housley@vigilsec.com>
To: <stds-802-linksec@ieee.org>
Sent: Thursday, January 09, 2003 2:20 PM
Subject: Re: [LinkSec] Bridge Details
>
> I called in. The speaker phone at the meeting is not very effective. It
> cut in and out several time per second. As a result, I could not catch a
> single word. I gave up....
>
> Russ
>
> At 06:20 PM 1/9/2003 +0200, Romascanu, Dan (Dan) wrote:
>
> >On behalf of Dolors Sala:
> >
> >We will start the Link Security SG meeting in a few minutes. For those
> >connecting remotely, the usual bridge details apply:
> >
> >1-877-237-7156 or +1-908-991-0191
> >
> >Participant code: 826435
>
>