Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Abhi, How do you think the RNR case? The information in such element is totally for other AP/BSS. BTW, “An EHT STA that is a STA 6G does not include HT/VHT Cap IE”, The following STA 6G rule is already defined in 11ax, do you need to stress it again in the note?
“A STA 6G shall not transmit an HT Capabilities element, VHT Capabilities element, HT Operation element, VHT Operation element or an HE Operation element that contains a VHT Operation Information field.”
Thanks
Best Regards
Jay Yang
From: Abhishek Patil <appatil@xxxxxxxxxxxxxxxx> Hi Laurent, Thank you for your email. There two issue that we need to address with respect to the current sentence in the spec (note the sentence is a ‘shall’):
Regards,
From: Cariou, Laurent <laurent.cariou@xxxxxxxxx>
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. Hi Abhi, Yes, how to set the fields in Multi-Link element is described elsewhere, so the Note is not needed. I you want to make it clear that the sentence is for describing the BSS and not a reported BSS for MLO, you can add (it transmits “outside the Multi-Link element”), but it’s already quite clear as the sentence says “to include the channel
width it is capable of supporting”. Note that maybe the sentence is not fully right when using MBSSID (something to check). Thanks Laurent
From: Abhishek Patil <appatil@xxxxxxxxxxxxxxxx>
Hi Yongho, Laurent, All, During yesterday's TGbe MAC call, I proposed the following resolution for CID 13863 in doc 11-22/1978.
There were some concerns expressed about the new paragraph (sentence related to reported STA ? highlighted in the snippet below). I am fine to delete the new (highlighted) paragraph since clause 35.3.3 provides guidance on the conditions for inclusion and contents of a per-STA profile for a reported STA. Clause 35.15 can focus on the contents of the transmitting (i.e., reporting) STA’s frame. Could you please let me know if the removal of the new paragraph addresses your concerns and/or if you have other suggestions? CID 13863 included for reference:
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 --------------------------------------------------------------------- This e-mail and any attachments may contain confidential material for To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |