Re: [STDS-802-11-TGBN] [EXT] Re: [STDS-802-11-TGBN] TGbn PHY Motion Requ

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Alfred,

Could you please add the following to the 11bn PHY motion list:

Motion: Move to include the following text to the 11bn SFD (DCN#11-24/1592r1)

The contents of the U-SIG field in ELR PPDU is defined as follows.

Category	Subfield	Bit Pos	Bits
U-SIG-1	Version identifier	B0-B2	3
	PPDU BW	B3-B5	3
	UL/DL	B6	1
	BSS color	B7-B12	6
	TXOP	B13-B19	7
	Disregard	B20-B24	5
	Validate	B25	1

Category	Subfield	Bit Pos	Bits
U-SIG-2	PPDU type & Compression Mode	B0-B1	2
	STA-ID	B2-B12	11
	ELR validate bits	B13-B15	3
	CRC in U-SIG	B16-B19	4
	Tail in U-SIG	B20-B25	6

ELR PPDU indication: PPDU type & compression mode set to ‘11’.
STA-ID (11 bit): B2-B12 bit in USIG-2.
ELR validate bits (B13-B15 of USIG-2): Set to all ‘1’ for ELR PPDU.

Note: B11-B15 – in EHT MU PPDU indicates “Number of EHT-Sig symbols”, and in UHR MU PPDU indicates “Number of UHR-Sig symbols”

Result: No objection

Thanks

Hari

From: Dongguk Lim <dongguk.lim@xxxxxxx>
Sent: Wednesday, November 13, 2024 11:49 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: [EXT] Re: [STDS-802-11-TGBN] TGbn PHY Motion Request

Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button

Hi Alfred,

Could you please add the following motions to 11bn PHY motion list :

Motion1 : Move to include following text to the 11bn SFD (DCN#11-24/1485r2)

The U-SIG field in ELR PPDU consists of 2 OFDM symbols and includes the same version independent fields defined in the U-SIG field of EHT PPDU
The details for the version dependent fields are TBD.

Results: No objection

Motion2 : Move to include following text to the 11bn SFD (DCN#11-24/1486r1)

The BW of ELR PPDU is 20MHz and one Spatial stream is used for ELR transmission.

Results: No objection

Motion3 : Move to include following text to the 11bn SFD (DCN#11-24/1486r1)

In the ELR transmission, a repeating of 52-tone RRU is used in 20MHz.

The same data is repeated in four 52-tone RRUs in 20 MHz.
The subcarrier allocation of 52-tone RRU equals the 52-tone RU defined in 11be.

Results: No objection

Best regards,

Dongguk.

From: Lin Yang [mailto:00002bbbd565f56a-dmarc-request@xxxxxxxxxxxxxxxxx]
Sent: Wednesday, November 13, 2024 2:05 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBN] TGbn PHY Motion Request

Hi Alfred,

Please add also the followings to the TGbn PHY motion list:

Motion 1: Move to include the following text to the 11bn SFD: (DCN# 11-24/1478r4)

ELR packet detection is done at L-STF, which has same length as legacy with 3dB power boosting

L-LTF also has same length as legacy with same power boosting as L-STF

Results: 49Y, 8N, 14A

Motion 2: Move to include the following text to the 11bn SFD: (DCN# 11-24/1478r4)

U-SIG carries STA-ID in ELR PPDU

Passed without any objection

Motion 3: Move to include the following text to the 11bn SFD: (DCN# 11-24/1478r4)

Define two ELR-Mark symbols for ELR mode classification

ELR-Mark symbols carry a known sequence to receiver
ELR-Mark symbols carry BSS color info in ELR-Mark sequence
No power boosting on ELR-Mark symbols
Two ELR-Mark symbols are both QBPSK modulated on data subcarriers
ELR-Mark symbols use the following tone plan

4 regular pilots as EHT-SIG + 48 data tones

Passed without any objection

Motion 4: Move to include the following text to the 11bn SFD: (DCN# 11-24/1478r4)

11bn defines the following PPDU frame format for ELR

PE TBD

Passed without any objection

Motion 5: Move to include the following text to the 11bn SFD: (DCN# 11-24/1478r4)

ELR PPDU has 3dB boosting applied on both ELR-STF and ELR-LTF

ELR PPDU has ELR-STF duration and sequence same as that of UHR DL SU/MU PPDU

4us using EHT-STF sequence for 20MHz

ELR PPDU defines a fixed/single mode of LTF+GI

11bn supports 2x LTF+1.6us GI only for ELR PPDU
11bn uses two UHR-LTF symbols for ELR PPDU

Note that ELR-STF/ELR-LTF are the short names of UHR-STF/UHR-LTF for ELR PPDU

Passed without any objection

Motion 6: Move to include the following text to the 11bn SFD: (DCN# 11-24/1478r4)

ELR PPDU defines two symbols for ELR-SIG, specifically

ELR PPDU defines separately encoded two symbols for ELR-SIG

Each symbol has separate CRC and tail bits (6 bits)

ELR-SIG has same tone plan and duplication scheme as ELR-data and BCC encoded with MCS0

Passed without any objection

Thanks,

Lin

From: Wook Bong Lee <000020fa465351a2-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, November 12, 2024 8:40 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBN] TGbn PHY Motion Request

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Both of them are from (DCN #11-241573r1).

Thank.

Best regards,

Wook Bong Lee

On Nov 12, 2024, at 8:38 PM, Wook Bong Lee <000020fa465351a2-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:

Hi Alfred,

Can you please add the following PHY motions to the motion list?

Do you agree to add following text to the TGbn SFD? (DCN #11-24/1573r1)

Define an enhanced long range (ELR) PPDU in IEEE 802.11bn with the following targets

Downlink and Uplink in 2.4 GHz (within BSS range with 11b beacon)
Uplink only in 5 GHz and 6 GHz bands
Minimum data rate is greater than or equal to 1.5 Mbps

Result: no objection

Do you agree to add the following text to the TGbn SFD?

In ELR PPDU, STA boosts L-STF and L-LTF by 3 dB

For UL, non-AP STA corrects CFO before transmission
Note: Non-AP STA pre-correction CFO requirement for residual CFO is TBD

Result: 51 Y/ 6 N/ 23 Abs

Thank you.

Best regards,

Wook Bong Lee

On Nov 12, 2024, at 7:44 PM, Eunsung Park <esung.park@xxxxxxx> wrote:

Hi Alfred,

Could you please add the following PHY motions to the motion list?

-       M1: Move to add the following text to the TGbn SFD (DCN# 11-24/1097r1)

n  For a DRU transmission, a new 4x UHR-LTF sequence is defined in each distribution bandwidth

u  A 4x UHR-LTF sequence has coefficients on all tones overlapped with DRU tones defined in each distribution bandwidth

n  Result: no objection

-       M2: to add the following text to the TGbn SFD (DCN# 11-24/1097r1)

n  In a PPDU using DRUs, a UHR-LTF sequence corresponding to the distribution bandwidth of the DRUs is used regardless of the PPDU bandwidth

n  Result: no objection

-       M3: Move to add the following text to the TGbn SFD (DCN# 11-24/1471r3)

n  For 80 MHz PPDU where one of the 20 MHz channels is punctured, the following distribution bandwidth mode is allowed for DRU

u  20 MHz + 40 MHz (or 40 MHz + 20 MHz) mode

n  Result: no objection

-       M4: Move to add the following text to the TGbn SFD

n  For 160 MHz and 320 MHz PPDUs, in an 80 MHz frequency subblock where one of the 20 MHz channels is punctured, the following distribution bandwidth mode is allowed for DRU

u  20 MHz + 40 MHz (or 40 MHz + 20 MHz) mode

n  Result: no objection

-       M5: Move to add the following text to the TGbn SFD

n  For 160 MHz and 320 MHz PPDUs, in an 80 MHz frequency subblock where one of the 40 MHz channels is punctured (i.e., either 1100 or 0011 case), the following distribution bandwidth mode is allowed for DRU

u  40 MHz mode

n  Y/N/A: 46/12/16

-       M6: Move to add the following text to the TGbn SFD

n  For a 40 MHz PPDU, the following distribution bandwidth mode is allowed for DRU

u  Only 40 MHz mode

n  Result: no objection

Best regards,

Eunsung

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

Re: [STDS-802-11-TGBN] [EXT] Re: [STDS-802-11-TGBN] TGbn PHY Motion Request