Re: [STDS-802-16] [Relay TG] Reject contributions to #50
Dear Mike
438r1 and 439r1 have been uploaded with the appropriate corrections.
Thanks,
Kerstin
-----Original Message-----
From: Mike Hart [mailto:Mike.Hart@UK.FUJITSU.COM]
Sent: Wednesday, July 11, 2007 8:43 AM
To: STDS-802-16@listserv.ieee.org
Subject: [STDS-802-16] [Relay TG] Reject contributions to #50
Dear Relay TG contributors,
The following contributions were submitted using the wrong template:
C802.16j-07/052
C802.16j-07/294
C802.16j-07/398
C802.16j-07/402
C802.16j-07/438
C802.16j-07/439
Please see: http://ieee802.org/16/arc/802-16list2/msg04308.html
We are instructed by the WG chair to reject them. If you still would
like your contribution to be considered, please make sure it is uploaded
so that you meet the advertised requirements:
http://ieee802.org/16/submit.html
The following contributions, whilst using the correct template, have not
followed the formatting requirements for the header or date correctly.
Please amend, as it is a requirement that it is in the correct format
else your contribution may be rejected.
C802.16j-07/436
C802.16j-07/412
C802.16j-07/307
C802.16j-07/226
Regards,
Mike
>-----Original Message-----
>From: Roger B. Marks [mailto:r.b.marks@ieee.org]
>Sent: 06 July 2007 19:44
>To: STDS-802-16@listserv.ieee.org
>Subject: [STDS-802-16] Call for Reply Comments: Relay TG's P802.16j
>Baseline
>
>The deadline has passed for the Relay TG's "Call for Technical
>Comments Regarding IEEE Project 802.16j.
>
>I have removed the uploaded comments and consolidated them in a
>Commentary database. This note is a Call for Reply Comments regarding
>that database:
> <http://ieee802.org/16/relay/docs/80216j-07_020.zip>.
>
>The tentative deadline is July 15 AOE <http://tinyurl.com/2258st>.
>The Relay TG Chair may wish to change this deadline by means of a
>note to the reflector.
>
>The instructions are included in the Commentary window that is set to
>open upon launch; see the "Submit Reply Comments" tab in the upper
>right corner.
>
>Commentary will export your reply comments to a file with a name of
>the format "16j_NameFamily_NameGiven.cmtr". Upload this file, by the
>deadline, to
> <http://relay.wirelessman.org>.
>The associated contributions are at that same URL.
>
>Roger
>
>
>> Dear 802.16WG members,
>>
>> Thank you for your support to the Relay TG activities.
>>
>> Please see the "Call for Technical Comments regarding IEEE Project
>> 802.16j"
>> Roger kindly uploaded:
>> http://www.ieee802.org/16/relay/docs/80216j-07_019.pdf
>> with a deadline of 5 July AOE, which is now requesting you to
>> submit comments
>> and associated contributions. The P802.16j Baseline Document (IEEE
>> 802.16j-
>> 06/026r4) referred has also been uploaded.
>>
>> As stated there, this Call for Technical Comments is intended to
>> facilitate
>> the completion of the baseline document with an aim to enter
>> working group
>> letter ballot after July Session #50.
>>
>> Please note that supporting document contributions must make use of
>> the
>> new IEEE 802.16 Document Submission Template, Rev. 9 (2007-06-17):
>> <http://WirelessMAN.org/submit.html>.
>>
>> Your comments and contributions submissions would be much
appreciated.
>>
>>
>> Thank you for your cooperation and best regards,
>>
>> Mitsuo
>>
>>
>> Mitsuo Nohara
>> Relay TG Chair, IEEE 802.16WG
>> KDDI R&D Labs.
>> mi-nohara@kddi.com
>>
>>