Re: [802.3ae_Serial] Re: SJTP Patterns

["John Ewen" <jfewen@xxxxxxxxxx>]

Ben,

Here are the revised patterns and slides as discussed on last week's
telecon.

(See attached file: SJTP Patterns V2.pdf)(See attached file:
pattern_seeds.txt)(See attached file: patternA.txt)(See attached file:
patternB.txt)(See attached file: patternC.txt)(See attached file:
patternD.txt)

Regards -- John

>>>>> <<<<<
John F. Ewen
IBM Corp.      QXS / 040-2
3605 Hwy 52 North
Rochester,  MN  55901

tel: 1-507-253-0799
fax: 1-507-253-4966
email: jfewen@xxxxxxxxxx
Notes: John Ewen/Rochester/IBM



                                                                                                                                           
                    "Ben Brown" <bbrown@xxxxxxxx>                                                                                          
                    Sent by:                                       To:     John Ewen/Rochester/IBM@IBMUS                                   
                    owner-stds-802-3-hssg-serialpmd@majordom       cc:     Petar Pepeljugoski/Watson/IBM@IBMUS, "DAWEPIERS (A-Englandex1)" 
                    o.ieee.org                                      <piers_dawe@xxxxxxxxxxx>, Lindsay Tom <TLindsay@xxxxxxxxxxxxxxxxxxxx>, 
                                                                    serialpmd <stds-802-3-hssg-serialpmd@xxxxxxxx>                         
                                                                   Subject:     [802.3ae_Serial] Re: SJTP Patterns                         
                    06/26/2001 01:17 PM                                                                                                    
                                                                                                                                           
                                                                                                                                           





John,

A few comments from today's conference call:

1) The text files with the patterns should include the
inverted portion as well. This makes it easier to enter
directly into a BERT.

2) The waveforms in your slides should include the
inverted portion to make sure nothing "ugly" is happening
in the transition.

3) The draft currently doesn't support using 2 seeds
that each need different data inputs. There is one bit
to select the data input to be used for both seeds.
If you feel a need to provide a pattern using 2 seeds
that each use a different data input, you'll need to
submit a comment against the draft to add a second
"data input" bit.

4) Please make this info available to the rest of the
reflector. If you think it is too big, send it to David
Law for posting on the web site (or I can do that).

BTW: I have now verified the data pattern for D2.

Thanks,
Ben

--
-----------------------------------------
Benjamin Brown
AMCC
2 Commerce Park West
Suite 104
Bedford NH 03110
603-641-9837 - Work
603-491-0296 - Cell
603-626-7455 - Fax
603-798-4115 - Home Office
bbrown@xxxxxxxx
-----------------------------------------

SJTP Patterns V2.pdf

pattern_seeds.txt

patternA.txt

patternB.txt

patternC.txt

patternD.txt