Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_PDCC] rewrite homework item



Neil, I’m not at liberty to share the whole table in a public forum such as this email reflector. I will share with you a snippet of what has been shared with me, one that shows the title and the first entry.

 

also, part of table 13 from IEC 62368-1:2018:

 

I’m not sure what table you show below, but it doesn’t match what I see.

 

Regards,

 

 

Chad Jones

Technical Leader, Cisco Systems

Chair, IEEE P802.3da Task Force

Principal, NFPA 70 CMP3

 

 

From: "<Neil> <Mabbott>" <neilmabbott5308@xxxxxxxxx>
Reply-To: "neilmabbott5308@xxxxxxxxx" <neilmabbott5308@xxxxxxxxx>
Date: Thursday, August 26, 2021 at 11:58 AM
To: PDCC <STDS-802-3-PDCC@xxxxxxxxxxxxxxxxx>
Subject: Re: [802.3_PDCC] rewrite homework item

 

Hi All,

 

I prefer George 1.

Sorry, I’m a little confused, maybe I missed something, however – I don’t see the connection to table 13 in IEC 62368-1?, which shows:

 

 

Kind regards

Neil

07741278752

 

From: Tremblay, David <david.tremblay@xxxxxxx>
Sent: Thursday, August 26, 2021 4:18 PM
To: STDS-802-3-PDCC@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_PDCC] rewrite homework item

 

Hi George,

 

Thank you for providing the two text options for consideration.

 

My preference is to go with the George1 text.

 

Regards,

David Tremblay

 

 

From: Bob Voss <Bob.Voss@xxxxxxxxxxx>
Reply-To: Bob Voss <Bob.Voss@xxxxxxxxxxx>
Date: Thursday, August 26, 2021 at 4:01 AM
To: "STDS-802-3-PDCC@xxxxxxxxxxxxxxxxx" <STDS-802-3-PDCC@xxxxxxxxxxxxxxxxx>
Subject: Re: [802.3_PDCC] rewrite homework item

 

George,

 

Thanks for this effort. I am a fan of option “George1”.

 

Bob

 

From: George Zimmerman <george@xxxxxxxxxxxxxxxxxxxx>
Sent: Wednesday, August 25, 2021 8:27 PM
To: STDS-802-3-PDCC@xxxxxxxxxxxxxxxxx
Subject: [802.3_PDCC] rewrite homework item

 

>> CAUTION: This email originated outside of our organization. Do not open attachments or click on links unless you recognize and verify the sender, and know the content is safe. <<

 

All – at the PDCC meeting, I took the action item to propose a rewrite of the statement below, so it did not require careful parsing of a comma to indicate that that the requirement referred to all external paired conductor cables with a diameter of 0.4mm:

 

Chad:

PSE circuits connected to external paired conductor cable, such as those described in Table 13 of IEC 62368-1, having a minimum wire diameter of 0,4 mm shall have the current limited to not more than 1,3 A.

 

 

I ended up with 2 versions, which I was arguing with myself over, and between Chad and Geoff they each preferred one or the other for the same reasons.  Hence, please provide your insight &/or preference:

 

George1: this one goes for 2 shorter sentences, easier to parse for non-native speakers (or to translate); however, it is a bigger change in the actual text:

PSE circuits connected to external paired conductor cable having a minimum wire diameter of 0,4 mm shall have the current limited to not more than 1,3 A.  Examples of such cables are described in Table 13 of IEC 62368-1.

 

George2: this one makes a smaller text change, just moving an existing clause within the sentence to avoid the comma-break.  However, it is a complex sentence, more difficult to parse:

 

PSE circuits connected to external paired conductor cable having a minimum wire diameter of 0,4 mm, such as those described in Table 13 of IEC 62368-1, shall have the current limited to not more than 1,3 A. 

 

 

George Zimmerman, Ph.D.

President & Principal

CME Consulting, Inc.

Experts in Advanced PHYsical Communications

george@xxxxxxxxxxxxxxxxxxxx

310-920-3860

 

 

George Zimmerman, Ph.D.

President & Principal

CME Consulting, Inc.

Experts in Advanced PHYsical Communications

george@xxxxxxxxxxxxxxxxxxxx

310-920-3860

 


To unsubscribe from the STDS-802-3-PDCC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-PDCC&A=1


To unsubscribe from the STDS-802-3-PDCC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-PDCC&A=1


To unsubscribe from the STDS-802-3-PDCC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-PDCC&A=1


To unsubscribe from the STDS-802-3-PDCC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-PDCC&A=1


To unsubscribe from the STDS-802-3-PDCC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-PDCC&A=1