Re: [STDS-802-16] AW: [STDS-802-16] Ranging correction retries

[Héctor Rubén Alba Díaz <hralba@CETECOM.ES>]

Dear Juergen,

 

Thank you very much for your useful response.

 

Regards,

 

Héctor

 

 

-----Mensaje original-----
De: OTTERBACH, Juergen [mailto:Juergen.Otterbach@ALCATEL.DE]
Enviado el: miércoles, 21 de septiembre de 2005 15:04
Para: STDS-802-16@LISTSERV.IEEE.ORG
Asunto: [STDS-802-16] AW: [STDS-802-16] Ranging correction retries

Dear Héctor,

I think this value has to be adapted according to the deployment. You have to understand

this 'default' as a typical value. If you have to many 'ranging correction retries' your 

system may be overloaded by single users "ranging all the time".

If this value is to low you may do not support users at the cell boarders, hard to range.

 

What I want to say is that this value will not be fixed and nobody can tell you.

Each operator will use that "screw" to optimize the overall BS operation/traffic

throughput (my opinion).

 

Kind Regards

Juergen OTTERBACH

-----Ursprüngliche Nachricht-----
Von: Héctor Rubén Alba Díaz [mailto:hralba@CETECOM.ES]
Gesendet am: Mittwoch, 21. September 2005 13:30
An: STDS-802-16@LISTSERV.IEEE.ORG
Betreff: Re: [STDS-802-16] Ranging correction retries

Dear All,

 

I would appreciate some feedback on this question.

 

Thanks and best regards,

 

Héctor

 

 

-----Mensaje original-----
De: Héctor Rubén Alba Díaz
Enviado el: viernes, 16 de septiembre de 2005 18:29
Para: STDS-802-16@listserv.ieee.org
Asunto: [STDS-802-16] Ranging correction retries

Dear all,

 

In page 178 of P802.16-2004/Cor1/D3, it is stated that the default value for the Ranging Correction Retries is 16. However, no minimum nor maximum value is specified. I would appreciate if somebody could clarify whether this means that whichever value for this parameter is correct or, otherwise, to give me some advise on it.

 

Thank you very much in advance.

 

Best regards,

 

 

Hector Alba 
Test Engineer

Telecommunications Division
CETECOM - Spain 
Phone: +34 952.619.315   -  Email: hralba@cetecom.es    -   Fax: +34 952.619.113

 

INFORMACIÓN IMPORTANTE
La información contenida en este e-mail va dirigida únicamente a su destinatario y podría contener información confidencial, si Ud. no es el destinatario indicado, no debe copiar, distribuir, o llevar a cabo ninguna acción con el mismo. Si hubiera recibido este e-mail, por error, por favor notifíquenos inmediatamente por e-mail o teléfono.

IMPORTANT NOTICE
The information contained in this e-mail is intended for the named recipients only. It may contain privileged and confidential information and if you are not the intended recipient you must not copy, distribute or take any action in reliance upon it. If you have received this e-mail in error, please notify us immediately by e-mail or telephone.